Bond It Rubber Bitumen Emulsion

• Suitable For: damp proofing, or as a waterproofer for floors, walls and other above ground structures
• Area of use: INT & EXT
• Application Method: stiff broom/brush
• Volume: 2.5L 5L 25L
• Container Type: tin
• Type: bitumen
• Colour: dark brown
• Brand: Bond It
• Manufactuer: Bond It
• Box Size: Singles Box Pallet

Bond It Rubber Bitumen Emulsion offers a remarkably efficient cold-applied solution, serving as a damp-proof membrane within sandwich constructions. Additionally, it proves effective as a waterproofer for floors, walls, and various above-ground structures. Moreover, when applied to green concrete, it functions as a curing membrane.

APPLICATION

1. Damp-proofing Floors:

• Prior to application, ensure thorough mixing.
• Using a brush, apply a minimum of 2 coats, each at 0.8 liters per m2, extending the treatment up the walls to connect with the existing wall damp-proof course (d.p.c.).
• Allow the first coat to dry before applying the second coat perpendicular to the first.
• Once dry, overlay the RUBBER BITUMEN EMULSION with a 50mm thick sand/cement or concrete screed.

2. Waterproofing Walls:

• For rising damp issues, consider repairing or inserting a damp-proof course.
• In cases of wall penetration-related dampness: a) Exterior walls: Level uneven surfaces, including brickwork, with cement mortar. Apply 3 coats of RUBBER BITUMEN EMULSION using a soft bristled brush, each at a rate of 0.5 liters per m2. Allow each coat to dry before applying the next. Finish by allowing the final coat to become tacky and then blind it with clean, sharp sand. b) Interior walls (moderately damp): Remove wallpaper, loose emulsion, or gloss paint. Repair any damaged or perished plaster. Dampen the prepared surface with clean water and apply 3 coats of RUBBER BITUMEN EMULSION with a soft bristled brush, each at a rate of 0.5 liters per m2. Allow each coat to dry before applying the next. Leave a horizontal strip about 300mm deep uncoated at the top to facilitate moisture escape by evaporation. c) Interior walls (very damp): Ideally, address very damp walls externally. If not possible, hack away old plaster to expose brickwork, repair joints or brickwork with cement mortar, and apply 3 coats of RUBBER BITUMEN EMULSION at the rate of 0.5 liters per m2. Ensure complete drying between coats. Once the final coat is thoroughly dry, replaster the wall. Note that severe conditions may require external treatments for a comprehensive solution.

Decorating Guidelines:

• Gloss Paints:
  • Refrain from using gloss paints and other oil or alkyd-based materials on surfaces treated with RUBBER BITUMEN EMULSION.
• Emulsion Paints:
  • If RUBBER BITUMEN EMULSION is applied over plaster, it is advisable to hang lining paper using cellulose paste. This ensures a suitable surface for emulsion paints.
• Wallpaper:
  • Prior to paper hanging, cover the surface with lining paper fixed with cellulose paste. Avoid hanging vinyl-coated papers or paperbacked vinyls over RUBBER BITUMEN EMULSION.

Waterproofing Structures:

• RUBBER BITUMEN EMULSION serves as a waterproof membrane on various structures such as bridge abutments, retaining walls, culverts, concrete, or brick foundations.
• Acts as a curing membrane for green concrete.
• Ensure the surface is sound, free from dust, dirt, and grease.
• Apply two coats of RUBBER BITUMEN EMULSION at a rate of 0.5 liters per m2 approximately.

Fixing Wood Blocks and Wood Mosaic Flooring:

• For wood blocks of 12mm thickness and above, dip the bottom face of each block into the material and place it immediately.
• Coverage is approximately 1.1 liters per m2.
• Emphasize the importance of not compromising on quality.

Description:

• RUBBER BITUMEN EMULSION is a dark brown rubber bitumen emulsion that dries to form a black, flexible, odor, and taint-free coating.

Rubber Latex Modified Waterproofing Solution for Wall and Floors:

• Part of the BITUBOND BITUMEN SOLUTIONS & COMPOUNDS RANGE.
• Contains relevant contact information and certifications.

Fixing Wood Mosaic Panels:

• Spread RUBBER BITUMEN EMULSION on the surface at 0.8 liters per m2 for wood mosaic panels.
• Allow a minimum of 24 hours before commencing sanding operations.
• Switch off underfloor heating for at least 48 hours before and after laying.

Keying Treatment:

• Apply 2 coats of emulsion for a “keyed” surface on glazed tiles, gloss-painted walls, and bricks.
• Allow the first coat to dry and blind the second coat with clean, sharp sand.
• Wait at least 48 hours before plastering or rendering (at least 6mm thickness).

Fixing Insulation Board, Expanded Polystyrene, and Cork Slabs:

• Ensure surfaces are level, clean, and free from dust.
• Apply a coat of RUBBER BITUMEN EMULSION to the porous base and place the insulation material while the product is still wet.
• If needed, support boards until the emulsion sets.
• Coverage is approximately 0.4-0.6 liters per m2.